Electric Double Bass NS Design CR 5 Amber

MADE IN THE CZECH REPUBLIC

LENGTH: 132 cm (52")

WEIGHT: 4.8 kg (10.5 lbs.)

SCALE LENGTH: 106 cm (41.73")

STRINGS: 5 (Low B, E, A, D, G)

MAPLE BODY AND NECK: The body and neck of the CR Series double bass are crafted of solid European hard maple, with a flame maple face. The neck has a traditional upright shape, but with extended access to the upper register of the fingerboard. The solid-body design enhances sustain and clarity, and is resistant to the effects of temperature change and humidity.

FINGERBOARD: The fingerboard is expertly graduated with an asymmetric profile to insure that each note is even and buzz free. An adjustable truss rod allows for precise relief adjustment for different strings and playing style. A cascading dot pattern across the neck provides an accurate reference for position. Hand graduated, asymmetric relief, cascading dot pattern for position reference; 43.1mm (1.7") wide at nut; 89.0mm (3.5") max. width.

FINISH: Traditional amber stain with clear semi-gloss polymer coating. Custom finish options are available for the CR Double Bass.

POLAR BRIDGE PICKUP SYSTEM: The Polar pickups can sense either lateral or vertical string vibration - or both! Set in the lateral mode, the pickup has unparalleled sensitivity in the direction of the bow. In the vertical mode, plucked notes are remarkably even and sustained.

EMG MAGNETIC PICKUPS: A feature of the CR4M and CR5M basses, the low-impedance EMG pickups incorporate individually adjustable coils and neodymium magnets. Each coil is buffered separately for a full sound quality with very low noise.

ACTIVE EQ AND MIXER: Controls include volume, a blend control for magnetic and piezo pickups, the mode of the Polar pickup direction, and individual treble EQ & bass EQ controls. The 18-volt power supply insures plenty of reserve overhead for full dynamics.

ADJUSTABLE BRIDGE: Two screws in the back of the body are used to adjust the bridge up and down. This allows the instrument to be set up to meet the requirements of many different playing styles.Hard maple; radius 7.9cm (3.1") string spacing 81mm (3.19").

NUT: Radius 7.9cm (3.1"); string spacing 30mm (1.19").

BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).

MAGNETIC PICKUP (for CR4M and CR5M only): Low impedance EMG magnetic pickup system, with individually adjustable coils, neodymium magnets and low noise, hum-canceling preamp. Produces smooth pizzicato tone not unlike an electric bass guitar. (Magnetic pickups are not recommended for bowing.)

ELECTRONICS: 18-volt active circuit by EMG. Mono output.

CONTROLS CR 5 Double Bass

- Volume
- Balance Mixer for Arco and Pizz - counterclockwise for optimal pizzicato (plucked, sustained) sound, clockwise for optimal arco (bowed and percussive plucked) sound, center for both
- Treble EQ - boost and cut
- Bass EQ - boost and cut

Several interchangeable support systems are available for the bass: the CR Tripod Stand, the more conventional Bass End Pin Stand with optional Conversion Kit, or full mobility the Boomerang™ Strap System or the Frame Strap System.

CR TRIPOD STAND: A fully adjustable steel tripod stand comes standard with the CR Series double bass. Weight is 3.6kg (8 lbs.).

BASS END PIN STAND: The optional Bass End Pin Stand offers full freedom of movement. Height, tilt and "right bout" angle are fully adjustable providing a more conventional feel. Weight 3 kg (7 lbs).

BASS END PIN STAND CONVERSION KIT: To hold the instrument upright for on-stand performance or when not in use, the Bass End Pin Stand can be attached to the CR Tripod Stand  (not compatible with the NXT Tripod Stand) using the optional End Pin Stand Conversion Kit.

BOOMERANG STRAP SYSTEM: This optional support system has a pivoting friction hub that holds the instrument firmly in place close to the body.  Attached with a guitar style strap to its two support arms, the system allows the instrument to be moved into virtually any position in relation to the hands and body as it is played. Weight is .45 kg (1 lbs.).

FRAME STRAP SYSTEM: This optional accessory is a lightweight frame structure that allows full mobility to perform in standing or upright position, holding the instrument out from the body similar to the reference in traditional positioning. The system is supported by a single guitar style strap extending over the left shoulder.  Weight is 0.68kg (1.5 lbs.).

TRANSPORT

GIG BAG: A padded gig bag is included as a standard accessory. It has a stand compartment, bow compartment, accessory pocket, handle and adjustable shoulder strap. Loaded weight is 11.2 kg (25 lbs.) including stand, and it fits in the overhead luggage compartment of most commercial aircraft.

FLIGHT CASE (optional): Aluminum edged plywood, 145 cm (57") long; 25 cm (10") wide; 25 cm (10") high. Loaded weight is 26 kg (58 lbs.), including stand.